Translate:
Installation
Tools
Phillips Screwdriver
Allen wrench
Parts
Your custom bracket
Longer screws, included in your package
Spacers, included if necessary
Steps to Install
Sitting in the drivers seat,
1) Lower steering wheel
2) Remove the 2 screws holding tach or tach/speedo (if your model has the tach and speedo as a single unit) and save them for later
3) Slide tach toward you about an inch and lay it down on its face
4) Remove the 2,3,or 4 screws on back of tach depending on your model. They will not be needed for the install
5) Carefully set the spacers on the tach
6) Carefully add the bracket and the new
screws and tighten them
7) Tilt tach up, sliding it back into place
8) Reinstall the first 2 Allen screws you removed
Feel free to contact me with any questions you may have
.
.
.
.